Marine Applications

Weather-resistant design and uninterrupted power architecture: Atemitech provides a solid hardware foundation for offshore environments that ensures visibility and reliability.
The offshore working environment presents an extraordinary challenge to hardware: salt mist corrosion, continuous vibration, strong deck light reflections, and a high dependence on power stability when distant from the coast. The procurement threshold for such applications often begins with certification documents and environmental test reports, requiring suppliers to provide comprehensive quality assurance rather than just relying on specification sheets.
- Salt Spray Resistance and Waterproof IP Certification
- High Visibility Display in Strong Light Environments
- Uninterrupted Power Backup in Offshore Operations
- Stable Operation under Extreme Temperature Variations
- Maritime Electronic Equipment Certification Review
- Battery Pack Humidity and Vibration Resistance Test
- Long-term Remote Operation and Maintenance Support Planning
- Compatibility Verification of Shipborne Integrated Systems
Why do outdoor and marine panel PCs require higher display brightness than indoor equipment, and how many nits are needed?
Standard indoor displays typically deliver 300 to 500 nits, which washes out under direct sunlight and sea-surface glare on deck. Outdoor and marine equipment generally requires 1,000 nits or more to remain sunlight-readable. Atemitech's proprietary high-brightness backlight reaches up to 1,600 nits while consuming under 7.0 W, and our touch displays can be customized up to 2,000 nits. Optional ambient light sensing adjusts brightness automatically, balancing daytime readability with glare control during night navigation. Combined with LumiBond® 2.0 optical bonding to minimize reflections, these displays integrate seamlessly into deck consoles, bridge systems and outdoor panel PCs.
Do touchscreens remain responsive with gloved or wet-hand operation, or when splashed with seawater ?
Yes. Atemitech's projected capacitive touch solutions support both gloved and wet-hand operation, with switchable glove and water modes that accurately register input even when the screen is covered by spray, rain or water droplets, while preventing false touches. Optional salt-water-resistant and EMI-resistant designs ensure stable performance amid the dense electronics and complex electromagnetic conditions found on board.
How are displays protected against salt spray corrosion and high humidity in harsh marine environments?
Through ingress protection, surface treatments and sealed construction. Atemitech's rugged displays are validated to IP65 and IP67 test standards, our touch display front panels are IP66-rated, and optional salt-water-resistant and solar-radiation-resistant treatments are available. Optical bonding prevents moisture ingress and internal fogging, while rugged enclosures provide weather, impact and vibration protection.
Does marine equipment require wide-temperature operation, and what range is supported?
Yes. Vessels transit from polar to tropical waters, and deck-mounted equipment must also withstand heat from direct sun exposure, conditions under which commercial-grade hardware often fails. Atemitech's touch displays operate from 0°C to 50°C as standard, with an optional wide-temperature range of -30°C to 85°C. Our rugged connectors operate from -25°C to 85°C with storage down to -40°C, and our industrial lithium battery modules can be engineered with dedicated thermal management for extreme-temperature conditions.
How can critical onboard equipment maintain uninterrupted power when immediate repair is not possible at sea?
We recommend a lithium-ion backup power architecture. Atemitech's backup battery units use 24 V and 48 V lithium-ion packs that are approximately 60% lighter, require about 70% less installation space and offer around five times the service life of conventional lead-acid batteries, making them particularly well suited to vessels with limited space and payload capacity. An integrated battery management system (BMS) provides overcharge, over-discharge, leakage and short-circuit protection for extended offshore operation.
How can battery health be monitored remotely to reduce downtime during offshore operations?
Atemitech's in-house BMS monitors voltage, current and temperature across up to 192 cells in series and records abnormal events for subsequent analysis. It identifies potentially failing cells early, enabling maintenance teams to intervene before issues escalate, and reports status via RS-232, RS-485 and CAN bus interfaces for integration with onboard monitoring systems.
How do connectors for shipboard electronics withstand continuous vibration and humid conditions?
Atemitech's rugged USB-C connectors and cables combine screw mounting with a clip-type locking mechanism to prevent loosening under hull vibration, and are rated for 10,000 mating cycles. The advanced model adds IP41 drip-proof protection and supports fast charging of up to 100 W, making it well suited to onboard electronics in cabins and on the bridge.
What documentation do marine equipment procurement reviews require, and how does Atemitech support them?
Typical requirements include quality control records, environmental test reports, safety certification documents and material traceability records. Atemitech is ISO 9001 certified and provides the corresponding quality records and test reports on request, while our battery products support international safety certification requirements, shortening the supplier qualification process for our customers.

Helping you easily tackle various challenging operational tasks